Plumber in Scottsdale, AZ
Most plumbing work isn't an emergency. A leak you noticed on the water bill, a softener you want plumbed in, pressure that seems too strong, supply lines that are getting old. For these you have time to compare companies, and a little local knowledge goes a long way.
Jobs that need a Scottsdale permit
The city lists these among its Minimum Plumbing Permit items (city page):
- water heater replacement, gas or electric;
- plumbing for a water softener;
- sewer line repair;
- repairing broken water lines;
- replacing the water lines in a single-family home.
Two things follow. First, ask any company you're considering whether the price includes pulling the permit. Second, because the job needs a permit, Arizona requires the company to hold a contractor license no matter how small the bill (Registrar of Contractors). Permit questions go to the city's One Stop Shop at 480-312-2500.
Check your own water pressure first
Scottsdale Water lends pressure gauges for free from its office at 9312 N. 94th Street, 7 a.m. to 4 p.m. (city page). Screw it onto the front hose bib with everything else in the house turned off. Pressure in the city ranges from about 40 to 120 psi depending on elevation.
- 80 psi or higher, steady: the city suggests a licensed plumber fit a pressure-reducing valve. They've been required on new buildings since 1995, so many older houses don't have one.
- Pressure that swings: the most common cause is simply high demand at busy watering times. A nearby main break, a failing pressure-reducing valve or an appliance such as a water softener can also do it. The city's tip: check pressure at the front hose bib, put the softener on bypass, and check again.
Finding a leak before you call
The EPA figure the city quotes is more than 10,000 gallons a year lost to leaks in the average home. To test yours, turn off all water use, note the meter reading and the sweep hand, wait at least 30 minutes and look again. Any change means something is drawing water (city page). Before calling a plumber, check the usual suspects: toilets that run, the irrigation system and the pool fill. If the meter still moves with all of those off, the leak may be in a line you can't see, and that's plumber work.
Hard water and fixtures
Depending on where you live in Scottsdale, your water carries 16 to 25 grains per gallon of hardness (fact sheet). Scale on aerators and showerheads usually soaks off in white vinegar, which the city itself recommends. Valves and cartridges that have seized from scale are a plumber's job. See hard water in Scottsdale for more.
Comparing plumbers on a job that can wait
- Get two written quotes and make sure they price the same scope.
- Ask each for its ROC license number and look it up: how to check an Arizona license.
- Ask who pulls the permit and whether the fee is included.
- Ask how they charge if the job runs longer than planned.
Related pages
- Emergency plumber in ScottsdaleThe first ten minutes, numbers and costs
- Drain cleaning in ScottsdaleClogs, sewer backups and who owns the pipe
- Water heater repair in ScottsdaleLeaks, no hot water, permits and prices
- Check an Arizona licenseWhen a license is required and how to look one up
Sources
Last checked: November 2026.